[Laser Optics] Laser Mirrors

페이지 정보

작성자 lvitech 댓글 0건 조회 261회 작성일 20-06-10 09:26

본문

Laser Mirrors

Overview

Cost effective IBS coated dielectric mirrors will do the job in all laser applications where low loss of light at discrete wavelength and angle is critical. Compared to other coatings, like e-beam or ion-assisted deposition, IBS coated mirrors are more dense and durable and also offer lower scatter and absorption losses. Mirrors will allow one to manipulate light over broadband spectral range at wide acceptance angle. At the same time dielectric coatings are more resistant to humidity, thermal changes, abrasion and salt exposure.

Features

Reflectance Rs>99.95% and Rp>99.9%

IBS coated laser line mirrors feature reflectance as high as 99.95% and 99.9% for s-polarized light and p-polarized light respectively.

Optimized for high laser induced damage threshold

Mirrors are optimized for for high power pulsed and CW lasers. 80 J/cm2, 1064 nm, 10 ns, S-on-1 is not a limit.

Low absorption and scatter loss.

IBS coatings feature negligible influence on scatter and absoprtion loss.

Optimized for narrow bandwidth laser lines.

Laser line mirrors are optimized for perfect performance at specific wavelength like 1064 nm, 1030 nm, 532 nm, 355 nm and etc.

Enhanced duty cycle.

Due to reduced number of bulk and surface defects mirrors are resistant to fatigue effect.

High purity fused silica substrates.

For excellent thermal and temporal stability we use high purity fused silica substrates.


Custom design Custom
  • Size range from 5 mm up to 100 mm.
  • Spectral range from 200 nm up to 6000 nm.
  • Custom shape, curvature, size.
  • Optimization for specific AOI or AOI cone.
  • Multi-wavelength design and broadband configuration.
  • Optimization for ultrafast applications.

댓글목록

등록된 댓글이 없습니다.